Across International 5L SolventVap w/ PolyScience AD Chiller, ULVAC PTFE Pump 110V


** Pickup In Store Or Freight (Delievery To Local Depot) Only.

Call Or Email For More Information:

Phone: (877) 702-1169

Ai 5L SolventVap w/ PolyScience AD Chiller, ULVAC PTFE Pump 110V

All of our Across Int. items ship from within Canada, so you will not receive any hidden customs or duty charges !!!

All Rotovapes are shipped via frieght carriers, please allow for 2-3 weeks delivery time. Door to Door service may not be available to all locations, and may require a freight depot pick up.  

Ai Part# SE013ps

A rotary evaporator is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. The process of rotary evaporation is most often used to separate solvents with low boiling points, such a n-hexane or ethyl acetate, from compounds which are solid at room temperature and pressure. However, careful application also allows for the removal of a solvent from a sample containing a liquid compound, if there is minimal co-evaporation (azeotropic behavior) and a sufficient difference in boiling points at the chosen temperature and reduced pressure.


Example: The following table is a list of a variety of substances ordered by increasing vapor pressure (in absolute units).

5L SolventVap w/ PolyScience AD Chiller, ULVAC PTFE Pump 110V

 Electrical requirements
 110V 60Hz single phase, 9.8A, 1075 watts (heater: 1050 watts, rotation motor: 25 watts)
 Glass material  High borosilicate glass 3.3
 Evaporating flask  Capacity: 0.13 gallon (0.5L), 0.26 gallon (1L) or 0.53 gallon (2L)
 Maximum load: Not to exceed 60% of the flask's capacity
 Rotation speed: 10 to 180 rpm
 Evaporating speed: 20 ml per minute
 Lifting: weight balancing manual control with lock
 Max lifting distance: 4 inches (extendable to 10 inches)
 Receiving flask
 0.26 gallon (1L)
 Condenser  Glassware: Vertical with dual-spiral glass tubing
 Chilling fluid connection: 3/8" hose barb x 2
 Vacuum connection: 3/8" hose barb x 1
 Working environment  5 to 95°F
 Water bath
 Temperature range: ambient to 99°C (210°F)
 Temperature controller: digital
 Capacity: 2 gallons
 Material: stainless steel
 Dimensions: 10" diameter x 5" depth x 9.75" height
 Media: water
 Max. water level: not to exceed 1" from the top rim of the bath
 Number of heaters: one
 Vacuum  Connection: 3/8" hose barb x 1 (on condenser)
 Sealing: PTFE + Viton gaskets
 Ultimate vacuum: < 3 torrs
 Safety  Dry-run, over-temp shut-off, fuse protections
 Weight & dimensions  Unit vs shipping:
 Rotary evaporator: 21 / 40 Lb
 Rotary evaporator: 22 x 12.5 x 26" / 26 x 21 x 29" (WxDxH)
 Warranty  One year warranty on rotary evaporator except glassware and all sealing gaskets.
 Glassware may have minute blemishes that will not affect the function.
 If you believe there are imperfections on your glassware, please contact us.
 We check all our inventory and make sure no defective glassware is sent to our customers.
 Click here for specs for C15-3 -15°C/5°F compact recirculating chiller
   Click here for specs for ULVAC DTC-41 1.6 cfm 7.5 torr 2-head diaphragm pump

 Ai rotary evaporator brochure


Standard package

 Part description


Part image

 PolyScience 110V AD -40°C to 200°C 15L compact recirculating chiller 1 set
 ULVAC 110V 1.6 cfm 7.5 torr 2-stage PTFE diaphragm pump & fitting 1 set

 Ai SolventVap 1.3-gallon rotary evaporator and water bath 1 set

 Vertical condenser with 2 chilling water ports and 1 vacuum port, glass

1 pc
 1.32G/5L round shaped rotating evaporating flask, glass 1 pc
 0.79G/3L round shaped receiving flask with 1 vacuum port, 1 drain port, and 1 PTFE open/close valve 1 pc
 Three-way tee vapor buffering flask, glass 1 pc
 Glass receiving flask & condenser connector with PTFE open/close switch 1 set
 Receiving flask glass vacuum port with PTFE open/close valve 1 set
 Glass material feeding port with PTFE open/close valve & PTFE extension tube 1 set


 Glass vapor duct with seal (pre-installed) 1 pc
 PTFE vacuum sealing kit (pre-installed) 2 pcs  
 Stainless steel pole 1 pc
 Mechanical vacuum gauge with 2 hose barb connectors 1 pc
 Rubber-wrapped condenser and receiving flask support and bracket 3 pcs
 Flask quick clamp (4 smaller pcs for condenser, receiving flask and feeder, 1 larger pc for 3-way flask) 5 sets
 PTFE centering ring for sealing flanges 5 pcs 
 Chilling fluid connector x 2, vacuum connector x 1 3 pcs  
 Allen key and backup inner hex screws 4 pcs
 User's manual 1 pc

Call for price!
(877) 702-1169
Only 10 left in stock
    • Weight
      120.0000 KG
    • SKU

Related products

Customers who viewed this product bought